Rates & Services
Rates
Multi-Track Recording and Mixing Time $35.00 per hour Email us Discounted Block rates
Includes a studio engineer, use of equipment and facilities listed for recording and finalizing.
Production includes tracking, over-dubbing, looping and mixing into a stereo media (1/4" reel tape
and CD). Customer will receive one (1) copy of the stereo mix on Redbook CD (16-bit) format
(no artwork included).
24-track to 2-track DAT and Finalizing $40.00 per hour
Includes the Finalizing of the stereo mix to the to a 2-track DAT. The customer will receive one (1)
copy of the finalized mix on Redbook CD (16-bit).
2-track DAT Recording and Mastering $40.00 per hour
Includes the Mastering of the finalized stereo mix using a PC-based Digital Editing System
(up to 24-bit/ 192 kHz). The customer will receive one (1) Mastered copy on Redbook CD (16-bit) or
24 bit/ 96kHz format. The 24/96 format is for master archiving and is not recognized by common
CD players.
Block Booking Rates Email us for Discounted Block rates
Project Rates Email us for Discounted Project rates
Studio Musicians Email us for Musicians Rates
CD Manufacturing Email us for complete CD manufacturing needs
Red Sky Studio is a Disc Makers Studio Partner
Please contact us to discuss your project. We will work with you to make sure that
your
schedule and budget requirements are met. Email
redskystudio@redskyrs.com
for more information.
Recording Media
2" x 2500' Tape Purchase $175.00 ea. Rental* $50.00 ea.
1/4" x 2500' Tape Purchase $25.00 ea. Rental * $15.00 ea.
Audio CDR Purchase $5.00 ea.
* Rented tapes will be erased after delivery
House Policies, Rules & Regulations
1. The customer must provide References upon request.
2. Billable session hours includes the START and END time that the studio is reserved for.
3. If the customer is late, they will be charged for the non-working hours (exceptions for special circumstances only).
4. A 48 hour notification via phone call or email is required if canceling (no exceptions).
5. Full session will be charged for NO SHOW without proper notification.
6. Payment is due at the end of each session.
7. Any damages to equipment or facility due to the malicious intent by the customer will be charged fully to the customer and
others involved.
8. The customer must agree to the complete House Policies, Rules and Regulations prior to conducting business.
Recommendations
Please consider the following for a more enjoyable, productive and successful session
1. Everyone involved should get plenty of rest before the session.
2. Everyone should arrive early or on-time with everything they need (instrument, guitar pick, tuner, drum sticks, batteries, etc...)
3. Consider very carefully who should attend the sessions (artist, musicians, producers, etc ...). It is NOT recommended to bring
friends to these sessions for the sake of bringing them. THIS IS NOT A HANGOUT! Also, they may be bored, slow the
process down or inhibit you at your expense, but its up to you.
4. Come prepared and well rehearsed with your material. Re-writes during the session can be costly. Remember, it's your show
and you're the Producer.
5. Bring any special equipment or piece of gear that you may need or would want to use (not listed on this site). Let the engineer
know what you are bringing to ensure compatibility or provisions for special hook-ups.
6. Bring a positive and creative vibe to the session and don't forget to leave the ego and attitude at the door.
7. Be professional and everyone will be more productive.
8. Bring extra lyric and chord sheets for other members, including the engineer.
9. Bring enough food, beverages (no alcohol allowed) or snacks to last the whole session. A trip to "Mickey-Ds" can delay the
process. A lounge with light snacks are available but may not be to your acquired taste.